09 / Oct / 2026

A type of pallet racking that can work in combination with a VNA truck is Selective racking. With this type of racking, the distance between rows can be made less than 2 meters. In this way, all pallets are still accessible to workers, and at the same time, there is greater efficiency in the use of floor space because of the reduced size of aisles.

The racking system itself is quite standard. The difference lies in the surroundings where the racking operates – the turret or man-up truck that doesn’t have to turn around in the aisle, guidance system that helps to keep the truck centered, and the flat floor from where the load can be lifted.

Key facts Detail
What it is Selective pallet racking arranged for very narrow aisle trucks
Aisle width Less than 2 m depending on the truck and the pallet
Height The equipment of VNA can go up to 18 m
GENAVCO range Godrej VNA racking using Crown TSP 1000/1500 turret trucks

 

Definition of VNA Racking and How It Operates

Godrej refers to the VNA racking system as the modified form of selective pallet racking that is compatible with VNA trucks. Both the beams and uprights are part of the same family as those used in the pallet racking system; therefore, sizes of pallets and heights of loads can always be matched level by level.

What makes VNA different is the truck. The VNA turret truck moves straightly within the aisles and rotates its forks instead of its body for storage and retrieval of pallets on both sides. The truck will never have to turn itself within the aisles; thus, the aisle does not have to be very wide apart from the truck size. For centering the truck, the guidance system is used through either mechanical rails or wires on the floor.

  • Storage capacity: The wider aisles mean that there is more floor space available for the storage racks.
  • Selectivity: Each pallet can be accessed without having to move other pallets.
  • Height: VNA systems tend to be high up, so the increase in efficiency comes from both height and floor space.
  • Speed: Guidance allows for high-speed travel down the aisle without having to make any turns.

VNA racking or selective racking?

Both provide you full access to all the pallets. The decision depends on your floor space, height of the building and if the layout will be permanent for decades to come.

Question VNA racking Standard selective racking
Aisle width Less than 2 m Wider aisles for counterbalance or reach trucks
Trucks Turret or man-up trucks with guidance Forklifts, stackers and reach trucks
Floor High level of floor accuracy needed A good level slab, with a less strict tolerance than VNA
Height Tall systems matched to the turret truck's lift Limited by the trucks in use
Layout changes Harder once guidance is installed Easier to rearrange
Best for High-bay buildings with a stable SKU profile Mixed fleets and changing layouts

 

In case your storage need is just density for a couple of fast-moving lines, a deep or drive-in rack will be cheaper. If you have a cold storage facility, every square meter that is not cooled is saving on costs; hence the smaller the aisle width becomes better.For the truck side of the decision, our guide to VNA trucks covers the Crown turret range and how to specify a VNA system, and narrow aisle forklifts explains where articulated trucks fit.

What should be ensured before installing a VNA shelving system?

  1. Specify the truck and racking combination. The aisle width, the top beam height and the transfer areas depend on the exact truck, so select the two together as a single system.
  2. Clear height and top level. Select a top beam to match the lift height of the truck, allowing room for the sprinklers and lights.
  3. Floor precision. Find out from the truck manufacturer what floor flatness tolerance is required before pouring the slab or surveying.
  4. Guidance system. Select either the floor rail guidance or wire guidance depending on the floor, design and the longevity of the installation.
  5. Transfer aisles and pick-up areas. Identify where trucks come in, go out and transfer pallets to ground equipment.
  6. Loads per level. Verify the pallet loads by weight, size and condition at each level and provide load markings.
  7. Approvals. Look into fire protection and official approvals for high-bay storage systems early on.

Which GENAVCO models fit?

GENAVCO supplies very narrow aisle racking from Godrej and the Crown turret trucks that run in it, so racking and trucking can be planned by one team.

Godrej VNA Racking
Aisle width: less than 2 m

Height: VNA equipment can reach up to 18 m

Guidance: mechanical rails or electrical wires

Range: wide choice of beams and uprights for any pallet size or load

Best for: High-bay stores, distribution centres and raw material or finished goods stores

View Godrej VNA racking

 

Crown TSP 1000/1500 Series
Lift height: up to 17.1 m

Capacity: 1,000, 1,250 and 1,500 kg

Power: 48-volt or 80-volt system with AC traction motor

Energy: regenerative lowering and braking

Best for: Full pallet put-away, picking and staging in very narrow aisles

View the Crown TSP Series

 

If guidance rails are not an option, the Flexi 15VN is an articulated truck that works in aisles from 1.6 m with ISO pallets, needs no guide rails and lifts to 8.6 m. For lower buildings and mixed fleets, selective pallet racking may be the simpler answer. Send us your drawings to request a VNA layout review.

What is the cost associated with operating VNA racking?

Racking is low maintenance itself. It all depends on how well the system stays calibrated.

  • Advice: Look out for any damage or loose fittings on the rail, as a damaged rail might slow down the truck.
  • Floor: Observe for any cracks, damage in joints and spilling in the tracks.
  • Uprights and beams: narrow aisles leave little room for error, so fit racking accessories at aisle ends and transfer points.
  • Trucks: turret trucks need planned servicing and trained operators, as they work at height in tight spaces.

Agree an inspection plan from day one. GENAVCO offers scheduled inspections, quick part replacements and structural audits for Godrej storage systems.

Questions asked often

What is VNA?

Very Narrow Aisle. It is a type of storage where the width of aisles between the racks is less than 2 meters and which requires trucks for that purpose.

What is the width of VNA aisles?

According to Godrej, VNA aisles have width less than 2 meters and it depends on the truck, pallet and guidance system.

How high is VNA racking?

The height of VNA equipment reaches 18 meters. The highest point that Crown TSP 1000/1500 can lift is 17.1 meters so the maximum level should correspond to the chosen truck.

Does the VNA require guide rails?

Standard turret trucks usually use mechanical guide rails or wire guidance. An articulated turret truck like the Flexi 15VN works in a narrow aisle without guide rails, but at a lower height.

Is VNA racking economically feasible for a small warehouse?

The economic advantage lies in cases where the floor space is costly or expansion is not possible. In case of a low structure with a varying product line-up, selective racking can yield better results.

Please send us your building plans, including heights and pallet sizes, and we will work out the VNA racking and truck design together

Serving Dubai, Abu Dhabi, Sharjah, Al Ain and the wider UAE.

REQUEST A VNA LAYOUT REVIEW

More Blogs

Hamm
02Jul

Soil Compactors and Plate Compactors: Key Differences Explained

Godrej
02Jul

How to Choose the Right Forklift for Warehouse Operations

Crown
02Jul

Why Pallet Racking Systems Are Essential for Modern Warehouses