Material handling equipment is referred to a machine/equipment that moves, lifts, stores or retrieves goods inside a warehouse or yard. The main types are:
- Pallet trucks
- Stackers
- Counterbalance forklifts
- Reach trucks
- Very narrow aisle (VNA) trucks
- Order pickers.
Each one is built around a specific combination of load, lift height and aisle width.
Most fleet problems start when one machine is asked to do another machine's job. This guide sets out what each type is for, the point at which you should move to the next type, and the Crown material handling equipment and Flexi models GENAVCO supplies in the UAE.
The Three Questions That Decide the Machine
- How high does the load go?
The three different classes of equipment are floor-level transfer, low racking up to about 4 metres, or high-bay racking above 10 metres.
- How wide the aisles are?
Counterbalance forklifts need the most room to turn. On the other hand, reach trucks work in narrower aisles, and VNA equipment works in aisles under 2 metres.
- Is the operator efficiently moving pallets or picking items?
Full-pallet handling and case or item picking need different machines; even in the same building.
Material Handling Equipment Types To Look At
| Type | Main job | Typical lift | Move up a class when |
| Hand pallet truck | Moving pallets at floor level over short distances | 202 mm (Crown PTH) | Daily distances or volumes tire operators |
| Powered pallet truck | Floor-level transfer over longer runs | Floor level | Loads must go into racking |
| Pedestrian stacker | Lifting pallets into low racking | Up to 4.4 m | Lift height or volume outgrows walk-behind work |
| Counterbalance forklift | General loading, unloading and racking | To 7.9 m (Crown range) | Aisles must shrink to gain storage |
| Reach truck | Narrow-aisle racking at height | To 14.2 m (Crown ESR) | Aisles need to drop below 2 m |
| VNA turret truck | Maximum storage density | To 17.1 m (Crown TSP) | This is the top of the range |
| Order picker | Picking cases or items at height | Operator reach to 10.2 m | Picks become full pallets |
Pallet Trucks - The Floor-Level Movement
A pallet truck lifts a pallet just to clear it off the floor and moves it. That’s it. It cannot possibly put anything into racking. The manual version suits short runs between a dock and a staging area. Once operators are pulling loaded pallets over long distances all shift, a powered pallet truck pays for itself in time and fatigue. Our article on hand and powered pallet trucks compared covers where that crossover sits.
1. Crown PTH Series Hand Pallet Truck
- Confirmed specification: 2,300 kg capacity regardless of fork length, 202 mm maximum lift, widths from 450 to 685 mm and fork lengths from 795 to 1,150 mm.
- Application fit: docks, retail back rooms and short transfers where a powered truck would sit idle most of the day.
View the Crown hand pallet truck
2. Crown WT 3000 Series Platform Pallet Truck
- Confirmed specifications are: rider pallet truck with 2,000 kg and 2,500 kg capacities.
- Application fit for: long dock-to-storage runs and cross-docking, where a ride-on truck saves operators walking the full distance.
View Crown platform pallet trucks
Stackers: Low-Level Racking Without a Forklift
A pedestrian stacker lifts pallets into racking while the operator walks behind it. It suits low racking, mezzanine loading points and lower-volume sites that cannot justify a full forklift. Read more on pedestrian stackers.
3. Crown WF, ST and SX Pedestrian Stackers
- Confirmed specifications are: WF 3200 at 1,000 or 1,200 kg with lift to 4,400 mm; ST 3200 at 1,000 kg to 4,250 mm; SX 3000 at 1,350 kg to 4,250 mm.
- Application fit for: small warehouses and stores with racking at four metres or less.
View Crown pedestrian stackers
Counterbalance Forklifts Known as The General-Purpose Machine
A counterbalance forklift is known to carry the load ahead of the front wheels and balance it flawlessly with weight at the rear. It loads trucks, works the yard and serves standard-aisle racking; which evidently makes it the most flexible machine in most fleets. The trade-off is aisle space. For fuel type and capacity choices, see our guide to forklifts in the UAE.
4. Crown SCT/SCF 6200 and FC5700 Counterbalance Trucks
- Confirmed specification: the three- and four-wheel SCT6200/SCF6200 series runs on a 48-volt system with capacities to 1,800 kg and lift heights to 7,495 mm. The four-wheel FC5700 series extends capacity to 3,000 kg with lift heights to 7,925 mm.
- Also available: Shantui forklifts, with diesel models from 2 to 10 tonnes and electric models from 1.5 to 3 tonnes, for heavier and outdoor work.
View Crown counterbalanced trucks
Reach Trucks and VNA: Height and Density
When a warehouse needs more pallet positions in the same footprint, aisle width is the dimension to cut. A reach truck extends its forks into the rack instead of turning the whole machine, so it works in tighter aisles and reaches higher. VNA equipment goes further and works in aisles only slightly wider than the truck. Our guide to VNA trucks explains the layout economics.
5. Crown ESR Reach Trucks and RR/RD Pantograph Reach Trucks
- Confirmed specification: ESR series capacities from 1.4 to 2.0 tonnes with lift to 14.2 m, and Xpress Lower technology that can double lowering speed. The RD series adds a deep-reach pantograph to handle pallets stored two deep.
- Application fit: narrow-aisle selective and double-deep racking with high throughput.
6. Crown TSP 1000/1500 VNA Turret Trucks and Flexi Articulated Trucks
- Confirmed specification: the TSP series lifts to 17.1 m with capacities of 1,000, 1,250 and 1,500 kg in aisles only slightly wider than the truck. The Flexi 15VN articulated truck works in aisles from 1.6 m with ISO pallets or 1.8 m with Euro pallets, without guide rails.
- Application fit: high-bay, high-density warehouses where land cost makes every aisle metre count. See Flexi articulated forklifts for the full range.
Order Pickers and Work Assist Vehicles: Picking, Not Pallets
E-commerce and spare parts operations spend most of their labour picking cases and items, not moving whole pallets. Order pickers lift the operator with the load so picks can happen at any racking level.
7. Crown GPC 3000, SP 1500 and LP 3500 Order Pickers, and the Wave
- Confirmed specification: the GPC 3000 covers first and second-level picking, with options for single or double pallets and towing carts. The SP 1500 reaches operator heights to 10.2 m and handles loads up to 2.4 m long. The LP 3500 is an economical choice for picking up to 3.6 m. The Wave lifts a person and a hand-carried load to effective reach heights of five metres and replaces rolling ladders.
- Application fit: e-commerce fulfilment, spare parts stores and maintenance stores.
View Crown mid and high-level order pickers
Not sure which mix of machines your warehouse needs?
Send us your racking heights, aisle widths, pallet types and daily movements. Our team will recommend a fleet and price it.
How to Choose Material Handling Equipment for Your Site
- Step 1 - Map how goods move from receiving to dispatch, and mark where each movement is floor-level, racking or picking.
- Step 2 - Measure aisle widths and the top racking beam height. These rule machine classes in or out before anything else.
- Step 3 - Count daily pallet movements and picks per hour. Volume decides manual versus powered.
- Step 4 - Check floor condition and whether any work happens outdoors, which affects tyres and power type.
- Step 5 - Match the equipment and the storage together. Warehouse racking systems and heavy duty shelving are specified with the truck, not after it.
Material Handling Equipment in UAE Warehouses
- Land and rent cost reward narrow aisles: moving from counterbalance to reach or VNA equipment often frees more space than leasing extra floor area would.
- Multi-shift operation: electric trucks working two or three shifts need a charging and battery plan from day one.
- Heat at docks and yards: trucks crossing between air-conditioned stores and hot yards need tyres, batteries and operators planned for both conditions.
- Fast growth in e-commerce: more sites now need order pickers and work assist vehicles alongside pallet handling equipment.
Reasons for Selecting GENAVCO for Handling Equipment
- Part of the Juma Al Majid Group since 1967: A reliable UAE supplier with ISO 9001 accreditation.
- Crown, Flexi and Godrej from one supplier: Trucks and storage equipment selected together to ensure aisles and rack heights are compatible with the truck fleet.
- Genuine spare parts always available: GENAVCO stocks genuine spare parts and has service vans on site to reduce downtime.
- Training: The GENAVCO Training Center provides training for operators, products and safety which can be customized to your needs.
Common Material Handling Equipment Mistakes
- Purchasing forklifts for a picking issue: If labor input is primarily focused on picking, then order pickers will increase production more than additional forklifts.
- Truck selection before racking design: Aisle and beam dimensions should be considered simultaneously.
- Maintaining manual pallet jacks over long distances: Walking distance turns into concealed labor expense.
- Using one kind of machine all the way around: All warehouses have a combination of various machines with each one being used in its own zone.
- Confusion between material handlers and warehouse trucks: Material handlers for scrap and recycling yards are very powerful machines with elevated cabs and long booms.
FAQs
What are the primary material handling devices used in a warehouse?
The primary material handling devices are hand and powered pallet trucks, pedestrian stackers, counterbalance forklifts, reach trucks, very narrow aisle (VNA) trucks and order pickers. There are storage facilities like racking and shelving which are designed to be used with these devices.
What is the difference between reach truck and forklift?
A counterbalance forklift approaches the rack and requires wide aisles to maneuver. Reach truck has its forks extended into the rack and operates in narrow aisles and lifts to higher heights. Crown ESR lifts up to 14.2 meters.
When do I need VNA equipment?
When storage density matters more than anything else and the building is tall. VNA turret trucks such as the Crown TSP series work in aisles under 2 metres and lift to 17.1 m, but they need a flat, level floor.
Does GENAVCO supply material handling equipment and racking together?
Yes. GENAVCO supplies Crown and Flexi trucks and Godrej storage systems, so the fleet and the racking can be planned as one layout.
Are You Ready To Make Your Plans?
Material handling equipment that suits you well depends on three things about your facility: height of stacking, width of aisles, and manual or mechanical movement of loads. We are the leading material handling solutions provider covering all of UAE with reliable servicing and genuine spare parts.
Tell us your racking height, aisle width and daily volumes. We will recommend the right machines and price them properly.
Serving Dubai, Abu Dhabi, Sharjah and the wider UAE.



